Tuesday, March 8, 2016

PROGRESS PROFILES FOR FLOORS, WALLS AND A HOST OF OTHER APPLICATIONS!

PROGRESS PROFILES

Came across these fantastic profiles from Progress Profiles, an Italian company whose products are available in India. Beautiful profiles for a variety of applications, which are elegant and finely crafted. Profiles are available in materials like brushed steel, brass, stainless steel etc, which are classy. Do check out the below details –


PROFILES FOR WALLS

PROJOLLY SQUARE 



POLISHED, SUPER POLISHED and SATINED STAINLESS STEEL AISI 304/1.4301-V2A and POLISHED STAINLESS STEEL AISI 316L/1.4404-V4A 
 
PROJOLLY SQUARE is a square shaped as a right angle that is versatile and suitable for various laying solutions, both for floors and coverings. It is used as a staff angle for external corners of tile coverings. It facilitates laying and eliminates the brittle unpredictability of ceramic tiles. It is also used as a finishing square for finishing wall coverings, raised platforms, steps, and baths, and is used as an edge and a skirting board for parquet, natural stone, moquette and epoxy resin coverings. It guarantees flawless work done with care that is of great aesthetic merit. It strengthens tile edges with a square finish, protecting corners efficiently, avoiding chipping and breakages resulting from knocks. This is required by the new European regulations on safety and accident prevention in public and private places 


PROBORD 





POLISHED and SATINED STAINLESS STEEL AISI 304/1.4301-V2A 
 
PROBORD is a rounded angle corner guard in stainless steel AISI 304-1.4301 used to protect and cover the outside corners and edges of tiled walls. It is applied while laying the tiles, thereby ensuring a precise “flush” finish with the covering. Extremely attractive, it is recommended for premises open to the public, schools, hospitals, kitchens and food industries. It is in conformity with accident prevention and health and hygiene directives. Can be matched with PROLISTEL and PROSHELL AISI 304-1.4301 stainless steel profiles with polished or satin finish


PROTERMINAL INT 



ANODISED AND POLISHED ALUMINIUM 
 
PROTERMINAL INT is a profile cover protection for internal angles also to decorate inside corners of porcelain tiles, could be used to finish tiles connected to doors ,windows ,tables .Available in silver and titanium anodized aluminium, or polished chrome and titanium in different heights H:08-10-12,5mm. Two and three way corners or in development. Available from January 2016 

PROFILES FOR FLOORS

PROLEVIGAL 


NATURAL BRASS 
 
PROLEVIGAL BRASS are separating profiles used to create the technical joint in the special types of pavements such as marble- Venice- palladium ones, that must be smoothed after their laying process. The particular “L” shape with the cut/drilled base and 2,5 mm thick vertical edge consent the perfect smoothing and constant thickness as well. Available in natural aluminium and natural brass, various thickness, as well in outlined/bent PROLEVIGAL CURVES BRASS versions. 


PROSQUARE


NATURAL BRASS 
 
PROSQUARE is a range of profiles in natural solid brass with a square or rectangular section used to create a decorative joint between wood and tile coverings. It allows the wood surface to be sanded without ruining the tile surface. 

PROCANAL 


NATURAL, POLISHED and CHROMED BRASS NATURAL and ANODISED SILVER ALUMINIUM 
 
PROCANAL is a channel for joining floors and also for use as strips in wall coverings. This profile is made in natural, polished and chromed brass as well as natural or anodised silver aluminium. It is also used as a cable channel for the insertion of wires and conduits in all types of floor. 

PROELEGANT 


NATURAL, POLISHED and CHROMED BRASS 
 
PROELEGANT is a refined profile, with 6 mm visible surface, designed to cover the joint between two types of floor covering, tiles - parquet, marble or granite, bestowing a prestige aesthetic effect that is ideal for indoor and outdoor finishes, even when subject to considerable loads. PROELEGANT is available in polished, natural and chromed brass. It is available in various heights in order to satisfy all technical, practical and, in particular, decorative requirements. The chromed version may be used as a decorative strip in the wall covering.

PROFILES FOR LAMINATE, PARQUET AND CARPETED FLOORS

PROSTYLE GRIP ACC


SATINED AISI 304/1.4301 -V2A STAINLESS STEEL 
 
PROSTYLE GRIP ACC is a non-slip profile in AISI 304/1.4301–V2A satined stainless steel, consisting of a 40 or 60 mm horizontal top with a groove for the insertion of a non-slip carborundum stripe and a 20mm vertical flat side. The profile can be fixed with adhesive film or with screws. The particular design of this profile makes it an elegant and appreciated solution also for modern stairs


CURVE AND BENDABLE PROFILES

PROFINAL CURVE 



NATURAL BRASS CURVABLE 

PROFINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and with a separation of 8 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of 8, 10 and 12.5 mm. 


PROTERMINAL CURVE 


















STAINLESS STEEL AISI 304/1.4301-V2A CURVABLE 
 
PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped, with a special system of perforations allowing them to be bent so that particular geometric shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and with a separation of 3 mm. The product is made in stainless steel AISI 304/1.4301-V2A in various heights (6, 8, 10 and 12,5 mm) in 2.7m bars



SKIRTING BOARDS



POLISHED and SATINED STAINLESS STEEL AISI 304/1.4301-V2A 
 
SKIRTING made in stainless steel AISI 304/1.4301-V2A in height 80 mm. Available with or without adhesive. Superior aesthetic quality, extremely strong and easy to lay, it is ideal for all public and private environments that require high standards of hygiene and image. Used increasingly more often in contrast combinations with wood, carpeted floors, etc. for an unmistakeable hi-tech effect. In order to facilitate and to perfect the laying process, internal and external angles, plugs and junctions are recommended


SKIRTING FOAMED VINYL RESIN



FOAMED VINYL RESIN 30 WOOD FINISHES, AND 3 IN SOLID COLOUR

SKIRTING 7016 is a vinyl resin foam profile with a height of 70 mm, available in 30 different wood - effect finishes and 3 finishes in solid colour that could be matched with the PROINSERT SYSTEM’s profiles. The profile, suitable like skirting for floating and glued wood floor, laminate and LVT, could be laid with suitable adhesive, nails, screws or using the pre-punched support fixed to the wall with screws every 50 cm. Its special section, that allows to cover a 16 mm perimetral joint, and wide range of finishes make it a very requested, elegant and econimic skirting board profile. 

CONTACT –

Jerry Cherian
Quality Architectural Solutions Pvt. Ltd.
Plackattu Colony,
Cochin - 682017
M: +919633422922
M: +919900585588
E:
 jerry@weareqas.com


FOR MORE INFORMATION – http://www.progressprofiles.com/





SUJITH.G.S is an architect and writer, with a passion for travelling, experiencing cultures, studying vernacular architecture as well as contemporary currents, which form the basis for his writing and blogging. You can contact him at ar.sujithgs@gmail.com


2 comments: